Connecting Analogue Receiver with Digital receiver

[rojar]

Hi

I would like connect Analogue receiver with my existing eMtech 200 digital receiver. Anbody help me how to connect

Regards

Rojar :cry:

[Yalickit]

I moved this to the decoder section rojar


You could try connecting to the loop F connector on the emtech. I know this is used for digital-digital. I'm not sure about analogue-digital capacities though.

[bassett]

You could use a double splitter, with a single "Power Pass" This will enable you to use both receivers together, providing you have two monitors.

[star trooper]

It might be silly to ask Bassett, what if one receiver is watching H signal and the other V signal? That cannot be done because both the receiver will send different voltage to the LNB. You can only watch channels with the same polarity, am I right?

[VK4BKP]

I use a loop F connector to the analogue from the digital but both receivers have to be the same polarity.

[LNB]

yep vk4bkp.. thats the way i do it too

[vetrun]

I use the loop F connector for my analogue receiver.

vetrun

[bassett]

Read the post again "Pooper" Single power pass,, Why do I bother.

[sinbad]

I have two analogue receivers and still have not connected them to my system.

Is it worth while keeping these or should I flog it off to my Indian or Chinese brothers???

[star trooper]

With Star Sports now in digital, I think you should swap it for some Indian curries meal and some Chinese stir fry. It's no point to keep this receiver unless you can understand Indian or Chinese language.

[sinbad]

Is star sports permanently on digital or is it on again and off again.

I used to love listening to the Chinese annoucer in HK calling the racing, unlike french or english where there is an air of fluency and the race call is much like a song, the HK caller's tones go up and down like a pair of nickers so when you are having a beer at Wan Chai listen to a race you look up thinking the race is almost finished only to find that they have just left the barrier.

The big fat guy that calls sport is not bad.

Could someone please let me know the frequency, pol, symbol rate and FEC please.

Anybody who has some stir fry or curry friends that want an anlogue box going cheaply please pm me.

[bassett]

Star sport,, 3920 H 26.850 Pids 513,644,645 Remember it's a NTSC
signal.