DiSEqC 1.2 - 2 on 1 RG6 cable?? - Free to Air Satellite Forums (Asia Pacific) - Sponsored by aDigitaLife.com Audio Visual Suppliers

Daneyboy · 13-07-2003, 10:42 PM

Is it possible to you use two DiSEqC 1.2 set ups on 2 seperate dishes via the one receiver and one coaxial cable run? I have one in operation now working very well.

Further to that, if two DiSEqC 1.2 set ups are possible can you use them in conjunction with a 22 KHz switch that switches between the 2 dishes via the receiver? I really don't want to do another RG6 coaxial cable run!!

I know I'm able to use the 22 KHz switch with one DiSEqC 1.2 set up to the first dish but don't know about two DiSEqC 1.2 via V-Box to actuator arm on the 2nd dish.

I might be wanting to do a bit to much here but it is worth the ask if someone knows. The 5400Z manual doesn't really state its limitaions.

13-07-2003, 10:42 PM	#1
Daneyboy Member Join Date: May 2003 Location: Darwin Posts: 90	DiSEqC 1.2 - 2 on 1 RG6 cable?? Is it possible to you use two DiSEqC 1.2 set ups on 2 seperate dishes via the one receiver and one coaxial cable run? I have one in operation now working very well. Further to that, if two DiSEqC 1.2 set ups are possible can you use them in conjunction with a 22 KHz switch that switches between the 2 dishes via the receiver? I really don't want to do another RG6 coaxial cable run!! I know I'm able to use the 22 KHz switch with one DiSEqC 1.2 set up to the first dish but don't know about two DiSEqC 1.2 via V-Box to actuator arm on the 2nd dish. I might be wanting to do a bit to much here but it is worth the ask if someone knows. The 5400Z manual doesn't really state its limitaions.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode